The workload implications of haptic displays in multi-display environments such as the cockpit : dual-task interference of within-sense haptic inputs (tactile/proprioceptive) and between-sense inputs (tactile/proprioceptive/auditory/visual)

Visual workload demand within the cockpit is reaching saturation, whereas the haptic sense (proprioceptive and tactile sensation) is relatively untapped, despite studies suggesting the benefits of haptic displays. MRT suggests that inputs from haptic displays will not interfere with inputs from visual or auditory displays. MRT is based on the premise that multisensory integration occurs only after unisensory processing. However, recent neuroscientific findings suggest that the distinction between unisensory versus multisensory processing is much more blurred than previously thought. This programme of work had the following two research objectives: 1. To examine whether multiple haptic inputs can be processed at the same time without performance decrement - Study One 2. To examine whether haptic inputs can be processed at the same time as visual or auditory inputs without performance decrement - Study Two In Study One participants performed dual-tasks, consisting of same-sense tasks (tactile or proprioceptive) or different-sense tasks (tactile and proprioceptive). These tasks also varied in terms of processing code, in line with MRT. The results found significantly more performance decrement for the same-sense dual-tasks than for the different-sense dual-tasks, in accordance with MRT, suggesting that performance will suffer if two haptic displays of the same type are used concurrently. An adjustment to the MRT model is suggested to incorporate these results. In Study Two, participants performed different-sense dual-tasks, consisting of auditory or visual tasks with tactile or proprioceptive tasks. The tasks also varied in terms of processing code. Contrary to MRT, the results found that when processing code was different, there was significant performance decrement for all of the dual-tasks, but not when processing code was the same. These results reveal an exception to two key MRT rules, the sensory resource rule and the processing code rule. It is suggested that MRT may be oversimplistic and other factors highlighted by recent neuroscientific research should be taken into account in theories of dual-task performance.EThOS - Electronic Theses Online ServiceGBUnited Kingdo

Pre-stressed advanced fibre reinforced composites fabrication and mechanical performance

Advanced composite materials have high strength-to-weight ratios, corrosion resistance and durability and are extensively used in aerospace, energy and defence industries. This research concentrates on minimising the process-induced residual stresses, and improving the fibre alignment of composites by employing a fibre prestress methodology. A novel flat-bed fibre prestress methodology for autoclave processing of composites was developed. This research investigates the effect of fibre prestress on 1) residual stresses, 2) fibre alignment, 3) static tensile and compression properties and 4) fatigue behaviour of composites. Experimental results show that this prestress methodology, on a 16-ply unidirectional E-glass/ 913 epoxy composite, reduces the residual strain of the composite from –600 µε to approximately zero for a prestress of 108 MPa. The strains measured from optical fibre sensors were in close agreement with those obtained using strain gauge. The results from fibre alignment studies showed that fibre prestressing improved the fibre alignment from 20% of fibres aligned to 0 ° degree in non-prestressed composites to 75% of fibres aligned to 0 ° degree in 108 MPa prestressed composites. Findings have shown that prestressing is beneficial to the static compressive and tensile performance of composites. The results show that fibre prestressing improves the fatigue life and resistance to stiffness degradation in the low stress level fatigue region. Also a change in static and fatigue damage mechanism was observed. The improvement in the static and fatigue properties is due to the reduction in residual stresses and fibre waviness. Overall the fibre prestressing methodology enhances the performance of composites by increasing the resistance to static and fatigue loading. The thesis also suggests that there is an existence of prestress limits to retain optimal material performance.EThOS - Electronic Theses Online ServiceGBUnited Kingdo

Investigation of Driving Force Variation During Swage Autofrettage, Using Finite Element Analysis

Swaging is one method of autofrettage, a means of prestressing high-pressure vessels to increase their fatigue lives and load bearing capacity. Swaging achieves the required deformation through physical interference between an oversized mandrel and the bore diameter of the tube, as it is pushed along and through the bore of the tube. A finite element (FE) model of the swaging process, developed previously by the author in ANSYS, was configured for comparison with an earlier model; this allowed the accuracy of further properties of the ANSYS model to be investigated. Driving force was the main property of interest, specifically how it varied with mandrel slopes and parallel midsection, to allow direct comparison with the earlier model. The variation of driving force with respect to coefficient of friction was investigated; driving force increased in near proportion, but a subtle trend indicated a further study of stress component be made. This was followed by a two-pass swage process. Close agreement was found with empirical data and the discrepancies observed between the two models are explained by the relatively coarse mesh used by the earlier model. This further verifies the sensitivity of the model described here

Micro-machining techniques for the fabrication of fibre Fabry-Perot sensors

Fabry-Perot optical fibre sensors have been used extensively for measuring a variety of parameters such as strain, temperature, pressure and vibration. Conventional extrinsic fibre Fabry-Perot sensors are associated with problems such as calibration of the gauge length of each individual sensor, their relatively large size compared to the diameter of optical fibre and a manual manufacturing method that leads to poor reproducibility. Therefore, new designs and fabrication techniques for producing fibre Fabry-Perot sensors are required to address the problems of extrinsic fibre Fabry-Perot sensors. This thesis investigates hydrofluoric acid etching and F2-laser micro-machining of optical fibres to produce intrinsic Fabry-Perot cavities. Chemical etching of single mode fused silica fibres produced cavities across the core of the fibres due to preferential etching of the doped-region. Scanning electron microscope, interferometric surface profiler and CCD spectrometer studies showed that the optical quality of the etched cavities was adequate to produce Fabry-Perot interference. Controlled fusion splicing of etched fibres produced intrinsic Fabry-Perot cavities. These sensors were surface-mounted on composite coupons and their response to applied strain was studied using low coherence interferometry. These sensors showed linear and repeatable response with the strain measured by the electrical resistance strain gauges. To carry out F2-laser micro-machining of fused silica and sapphire substrates, a micro-machining station was designed and constructed. This involved the design of illumination optics for 157 nm laser beam delivery, the design and construction of beam delivery chamber, target alignment and monitoring systems. Ablation of fused silica and sapphire disks was carried out to determine ablation parameters suitable for micro-machining high aspect ratio microstructures that have adequate optical quality to produce Fabry-Perot interference. Cavities were micro-machined through the diameter of SMF 28 and SM 800 fibres at different energy densities. CCD interrogation of these intrinsic fibre cavities ablated at an energy density of 25 x 10 4 Jm -2 produced Fabry-Perot interference fringes. The feasibility of micro-machining high aspect ratio cavities at the cleaved end-face of the fused silica fibres and through the diameter of sapphire fibres was demonstrated. A technique based on in-situ laser-induced fluorescence monitoring was developed to determine the alignment of optical fibres and ablation depth during ablation through the fibre diameter. Ablation of cavities through the diameter of fibre Bragg gratings showed that the heat-generated inside the cavity during ablation had no effect on the peak reflection and the integrity of core and cladding of the fibre. Finally, a pH-sensor, a chemical sensor based on multiple cavities ablated in multimode fibres and a feasible design for pressure sensor fabrication based on ablated cavity in a single mode fibre were demonstrated.EThOS - Electronic Theses Online ServiceGBUnited Kingdo

No sex scandals please, we're French: French attitudes towards politicians' public and private conduct

The notion of distinct ‘public’ and ‘private’ spheres underpins much normative and practical engagement with political misconduct. What is less clear is whether citizens draw distinctions between misdemeanours in the ‘public’ and ‘private’ spheres, and whether they judge these in systematically different ways. This paper explores attitudes to political misconduct in France. French citizens are often said to be particularly relaxed about politicians’ private affairs, but there has been little empirical evidence for this proposition. Drawing on original survey data, this paper demonstrates clearly that French citizens draw a sharp distinction between politicians’ public and private transgressions, and are more tolerant of the latter

Public crises, public futures

This article begins to map out a novel approach to analyzing contemporary contexts of public crisis, relationships between them and possibilities that these scenes hold out for politics. The article illustrates and analyses a small selection of examples of these kinds of contemporary scenes and calls for greater attention to be given to the conditions and consequences of different forms and practices of public and political mediation. In offering a three-fold typology to delineate differences between ‘abject’, ‘audience’ and ‘agentic’ publics the article begins to draw out how political and public futures may be seen as being bound up with how the potentialities, capacities and qualities that publics are imagined to have and resourced to perform. Public action and future publics are therefore analysed here in relation to different versions of contemporary crisis and the political concerns and publics these crises work to articulate, foreground and imaginatively and practically support

In patients with severe uncontrolled asthma, does knowledge of adherence and inhaler technique using electronic monitoring improve clinical decision making? A protocol for a randomised controlled trial

Introduction: Many patients with asthma remain poorly controlled despite the use of inhaled corticosteroids and long-acting beta agonists. Poor control may arise from inadequate adherence, incorrect inhaler technique or because the condition is refractory. Without having an objective assessment of adherence, clinicians may inadvertently add extra medication instead of addressing adherence. This study aims to assess if incorporating objectively recorded adherence from the Inhaler Compliance Assessment (INCA) device and lung function into clinical decision making provides more cost-effective prescribing and improves outcomes. Methods and analysis: This prospective, randomised, multicentre study will compare the impact of using information on adherence to influence asthma treatment. Patients with severe uncontrolled asthma will be included. Data on adherence, inhaler technique and electronically recorded peak expiratory flow rate will be used to promote adherence and guide a clinical decision protocol to guide management in the active group. The control group will receive standard inhaler and adherence education. Medications will be adjusted using a protocol based on Global Initiativefor Asthma (GINA) recommendations. The primary outcome is the between-group difference in the proportion of patients who have refractory disease and are prescribed appropriate medications at the end of 32 weeks. A co-primary outcome is the difference between groups in the rate of adherence to salmeterol/fluticasone inhaler over the last 12 weeks. Secondary outcomes include changes in symptoms, lung function, type-2 cytokine biomarkers and clinical outcomes between both groups. Cost-effectiveness and cost-utility analyses of the INCA device intervention will be performed. The economic impact of a national implementation of the INCA-SUN programme will be evaluated. Ethics and dissemination:The results of the study will be published as a manuscript in peer-reviewed journals. The study has been approved by the ethics committees in the five participating hospitals. Trial registration NCT02307669; Pre-results

Set points, settling points and some alternative models: theoretical options to understand how genes and environments combine to regulate body adiposity

The close correspondence between energy intake and expenditure over prolonged time periods, coupled with an apparent protection of the level of body adiposity in the face of perturbations of energy balance, has led to the idea that body fatness is regulated via mechanisms that control intake and energy expenditure. Two models have dominated the discussion of how this regulation might take place. The set point model is rooted in physiology, genetics and molecular biology, and suggests that there is an active feedback mechanism linking adipose tissue (stored energy) to intake and expenditure via a set point, presumably encoded in the brain. This model is consistent with many of the biological aspects of energy balance, but struggles to explain the many significant environmental and social influences on obesity, food intake and physical activity. More importantly, the set point model does not effectively explain the ‘obesity epidemic' - the large increase in body weight and adiposity of a large proportion of individuals in many countries since the 1980s. An alternative model, called the settling point model, is based on the idea that there is passive feedback between the size of the body stores and aspects of expenditure. This model accommodates many of the social and environmental characteristics of energy balance, but struggles to explain some of the biological and genetic aspects. The shortcomings of these two models reflect their failure to address the gene-by-environment interactions that dominate the regulation of body weight. We discuss two additional models - the general intake model and the dual intervention point model - that address this issue and might offer better ways to understand how body fatness is controlled

Altered Neurocircuitry in the Dopamine Transporter Knockout Mouse Brain

The plasma membrane transporters for the monoamine neurotransmitters dopamine, serotonin, and norepinephrine modulate the dynamics of these monoamine neurotransmitters. Thus, activity of these transporters has significant consequences for monoamine activity throughout the brain and for a number of neurological and psychiatric disorders. Gene knockout (KO) mice that reduce or eliminate expression of each of these monoamine transporters have provided a wealth of new information about the function of these proteins at molecular, physiological and behavioral levels. In the present work we use the unique properties of magnetic resonance imaging (MRI) to probe the effects of altered dopaminergic dynamics on meso-scale neuronal circuitry and overall brain morphology, since changes at these levels of organization might help to account for some of the extensive pharmacological and behavioral differences observed in dopamine transporter (DAT) KO mice. Despite the smaller size of these animals, voxel-wise statistical comparison of high resolution structural MR images indicated little morphological change as a consequence of DAT KO. Likewise, proton magnetic resonance spectra recorded in the striatum indicated no significant changes in detectable metabolite concentrations between DAT KO and wild-type (WT) mice. In contrast, alterations in the circuitry from the prefrontal cortex to the mesocortical limbic system, an important brain component intimately tied to function of mesolimbic/mesocortical dopamine reward pathways, were revealed by manganese-enhanced MRI (MEMRI). Analysis of co-registered MEMRI images taken over the 26 hours after introduction of Mn^(2+) into the prefrontal cortex indicated that DAT KO mice have a truncated Mn^(2+) distribution within this circuitry with little accumulation beyond the thalamus or contralateral to the injection site. By contrast, WT littermates exhibit Mn^(2+) transport into more posterior midbrain nuclei and contralateral mesolimbic structures at 26 hr post-injection. Thus, DAT KO mice appear, at this level of anatomic resolution, to have preserved cortico-striatal-thalamic connectivity but diminished robustness of reward-modulating circuitry distal to the thalamus. This is in contradistinction to the state of this circuitry in serotonin transporter KO mice where we observed more robust connectivity in more posterior brain regions using methods identical to those employed here

Welfare and education in British colonial Africa, 1918–1945

The relevance of historical research for an explanation of the roots of contemporary educational policy and its relationship to notions of equity, democracy and development has been sadly neglected in recent years. This means that policy makers have forfeited the advantages of reflecting on the traditions and experience of past endeavors and examining them critically for potential understandings of present and future policy making. The aim of this paper was to direct the attention of researchers to the complexities and multifaceted nature of educational policy development in inter-war era (1918–1945), with specific reference to British colonial Africa and South Africa. It will also hopefully provide a set of elementary tools for all of those interested in educational policy-making strategies that seek to promote meaningful social, economic and political change in an age of uncertainty